0% Complete
صفحه اصلی
/
پنجمین کنفرانس بین المللی میکروالکترونیک ایران
Design of Electrical Stimulation Circuit in 180 nm/1.8 V Standard CMOS Process
نویسندگان :
Askandar Nikzad
1
Mohammad Yavari
2
Amir Kashi
3
1- دانشگاه صنعتی امیرکبیر
2- دانشگاه صنعتی امیرکبیر
3- دانشگاه صنعتی امیرکبیر
کلمات کلیدی :
Implantation system،Electrical stimulation circuit،Digital-to-analog converter (DAC)،Current driver،High voltage switches،Low voltage technology،Monte Carlo analysis
چکیده :
This article presents an electrical stimulation circuit for use in implantable medical microsystems, which includes digital-to-analog converter, tuned cascade transistor structure, voltage level shifter circuit, and switches circuit for driving the stimulation current. In this research, DAC circuits and current directing switches are proposed in 180nm CMOS 1.8 V technology. Among the performed works, we can mention the increase of the current range up to 2.5 milliamperes and the stimulation voltage up to 12.6 volts to stimulate high-quality nerve tissues. In this context, a digital-to-analog converter circuit with a thermometer-coded structure has been designed and simulated with INL, DNL<0.5 LSB specifications, as well as SFDR=50.74 dB, SNDR=37.1 dB, and ENOB=5.87 Bits. Moreover the most critical parameter of the final system is the measured power consumption of 1.23 milliwatts.
لیست مقالات
لیست مقالات بایگانی شده
Thorough Analysis of mm-Wave Broadband Planar and Vertical Transitions for Loss Reduction of Interconnects in Multilayer PCBs
Pouay Namaki - Nasser Masoumi - Mohammad-Reza Nezhad-Ahmadi
Broadband All-Dielectric Metasurface Absorber For VLC Applications
Ershad Sharifi - Mohammad Razaghi - Keyhan Hosseini
A 2x1 Bit Multiplier Based on Vibrating Microelectromechanical Resonators
ALI DELVAR - Farshad Babazadeh
Evaluation of Run-Time Energy Efficiency using Controlled Approximation in a RISC-V Core
Arvin Delavari - Faraz Ghoreishy - Hadi Shahriar Shahhoseini - Sattar Mirzakuchaki
Optimized design of Lower Complexity Reversible Toffoli Gate in QCA Technology
Saeid Seyedi - Hatam Abdoli
A Review for Graphene, Graphene-based Materials, and Their Applications in Photonics and Optoelectronic Devices
Seyedeh Nastaran Talebzadeh - Saeed Golmohammadi - Seyyedeh Ladan Talebzadeh
Six-Band Frequency Full Absorber Based on the Heterogeneous Structure of Graphene Metamaterial
Yousef Rafighirani - Javad Javidan - Hamid Heidarzadeh
Optimizing High Dynamic Range Current Measurement Circuit for IoT Applications
Yas Hosseini Tehrani - ُSeyed Mojtaba Atarodi
A Low-Power Differential Ring VCO Using An Active Inductor For Wireless Applications
Mahdi Alijani - Mohammadmahdi Javanmardi - Adib Abrishamifar
Design of a Calibration Circuit for Adaptive Phase-Locked Loop in the 5GHz Range Using CMOS 180nm Technology
Reza MirAlvandi - Mahdi Ehsanian
بیشتر
ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 41.5.5